SB406-PV

$6,631.25

SB406-PV, a 4U 72-Bay High Density Storage Server Solution, supports dual Intel® Xeon® Scalable Processors. SAS 12G backplane with built-in expander providing 72x 3.5″ and 2x 2.5” top-loading drive bays. SB406-PV provides 1x OCP v2.0 MEZZ card slots for add-on cards and suitable for cold storage which requires the capacity for vast amount of data.

Key Features
• 4U 72-Bay ultra density storage server
• Supports two Intel® Xeon® Scalable Processors
• With Intel® Lewisburg C620 series Chipset to provide 5+ years product life cycle
• Flexible I/O usage with Max I/O® to support up to 1 OCP x16 Mezzanine card V2.0
• Onboard Baseboard Management Controller for system management and IPMI control
• Front-to-back airflow and hot swap redundant fans to provide optimal thermal conditions
• Customizable to meet OEM/ODM requirements

 

Dimensions (W x D x H)
• mm : 434 x 810.5 x 176
• inches : 17.1 x 31.9 x 6.9
Motherboard
AIC Server Board Pavo
Processor
Processor Support :

• Two Intel® Xeon® Scalable Processors
• Supports CPU TDP up to 125W

UPI Speeds: 10.4 GT/s, 9.6 GT/s
Socket Type : Socket P0 (LGA-3647 Socket)
Chipset Support
Intel® Lewisburg C620 series PCH
System Memory
• 6 x memory channels per CPU, 2 channels with 2DPC + 4 channels with 1DPC
• 16 x DIMM slots support:
DDR4 2400/2666MHz RDIMM/LRDIMM (feature supports up to DDR4 2933MHz by next gen. process upgrade)
– up to 256GB RDIMM SRx4
– up to 512GB RDIMM DRx4
– up to 2048GB RDIMM 3DS 8Rx4
– up to 1024GB LRDIMM QRx4
– up to 2048GB LRDIMM 3DS 8Rx4
• Intel® Optane™ DC Persistent Memory (Apache Pass) support
Front Panel
System power on/off, System reset, 1 x USB 2.0 Type A
LEDs
Power status, Drive activity, System ID
Drive Bays
Internal :
• 72 x 3.5” hot swap (Top-Loading)
• 2 x 2.5″ hot swap (7mm, Top-Loading)
Backplane
3 x 24-port 12Gb SAS backplane with 36-PHY expander and 2 x 8i SAS Slimline connectors
Expansion Slots (PCIe 3.0)
1 x16 for OCP Mezzanine V2.0 (Type 2:1 1 x QSFP or 2 x QSFP+)
Expander Boards
• 1 x Broadcom/LSI SAS3x48 bridge board
• 3 x Broadcom/LSI SAS3x36 24 x 3.5” backplane
System BIOS
BIOS Type: Insyde UEFI BIOS
BIOS Features :
• ACP
• PXE
• WOL
• AC loss recovery
• SMBIOS
• Serial console redirection
• SRIOV
• BIOS Boot Specification
• BIOS Recovery Mode
• iSCSI
• TPM
• PICe Hotplug
On-board Devices
SATA :
Intel® Lewisburg PCH on-chip solution
• 4 x SATA 6.0 Gb/s (by 1 x mini-SAS HD) + 2 x SATA 6.0 Gb/s (by 2 x SATA 7 pin) + 5 x SATA 6.0 Gb/s (by Max I/O®)
IPMI :
Aspeed AST2500 Advanced PCIe Graphics & Remote Management Processor
• Baseboard Management Controller
• Intelligent Platform Interface 2.0 (IPMI 2.0)
• iKVM, Media Redirection, IPMI over LAN, Serial over LAN
• SMASH Support
• HTML5
• Redfish
Network Controller :
• Intel® PCH (Lewisburg) Integrated 10GbE LAN Controller with dual SFP+ rear connectors
• Intel® I350 dual ports GbE RJ45 rear connectors
• Realtek RTL8211E for BMC dedicated management port
Graphics :
Aspeed AST2500 Advanced PCIe Graphics & Remote Management Processor
• PCIe VGA/2D Controller
• 1920×1200@60Hz 32bpp
Rear I/O

• LAN: 2 x 10GbE SFP+ ;  2 x GbE RJ45 ; 1 x GbE RJ45 dedicated to BMC management
• USB: 2 x USB 3.0 Type-A  
• VGA: 1 x external DB-15 VGA port
• Serial Port: 1 x audio jack for COM port

Power Supply
1600W 1+1 redundant power supply 80+ Platinum
• AC INPUT : 200~240V,50/60Hz,12A (except China/Taiwan)
• AC INPUT : 200~240V,50/60Hz,10A (for China/Taiwan)
System Cooling
• 3 x 40x56mm easy swap fans (MB canister)
• 8 x 60x56mm hot swap fans
System Management
• IPMI 2.0
• KVM over IP
• Media redirection
• Temperature, fan, voltage, PSU sensor monitor
• System temperature
• System ID / System fail indicator
• Remote Power on/off/reset
• SEL message alarm through mail
• SNMP support
• Intel NM
• HTML5
• Redfish
Environmental Specifications
• Storage temperature : -10ºC(14ºF) ~ 60ºC(140ºF)
• Operating temperature : 0ºC(32ºF) ~ 35ºC(95ºF)
• Storage operating humidity : 5%~95% non-condensing
Gross Weight (w/PSU & Rail)
• kgs : 45.5
• lbs : 100.3
Packaging Dimensions (W x D x H)
• mm : 675 x 1120 x 536
• inches : 26.6 x 44.1 x 21.1
Mounting
Standard: 31″ slide rail
Option: Cable Management Kit

* All specifications are subject to change without notice.