SB102-UR

$1,534.00

SB102-UR, a 1U 10-Bay Storage Server Solution, supports dual Intel® Xeon® Scalable Processors. SB102-UR has 8 x 2.5” 12G SAS hot-swappable and 2x 2.5″ 6G SATA HDD/SSD bays to provide high storage density.

Key Features
• 1U 10-Bay general purpose storage server
• Supports two Intel® Xeon® Scalable Processors with Intel® Lewisburg C620 series chipset
• Onboard Baseboard Management Controller for system management and IPMI control
• Front-to-back airflow and hot swap redundant fans to provide optimal thermal conditions
• Two 10GbE SFP+ ports plus dedicated BMC management port

Dimensions (W x D x H)
• mm : 438 x 800 x 43.5
• inches : 17.2 x 31.5 x 1.7
Motherboard
AIC Server Board Ursa
Processor
Processor Support : • Intel® Xeon® Scalable Processors (Skylake and next gen. CPU)
• Supports CPU TDP up to 205W
UPI Speeds: 10.4 GT/s, 9.6 GT/s
Socket Type : Socket P0 (LGA-3647 Socket)
Chipset Support
Intel® Lewisburg C620 series Chipset
System Memory
• DDR4 2666/2400 (1DPC/2DPC) MHz (feature supports up to DDR4 2933MHz by next gen. process upgrade)
• Total 24 memory slots ; 6 channel per CPU (2DPC)
• Up to 3TB 3DS ECC RDIMM/LRDIMM
• Intel® NVM DIMM (Apache Pass) support by next gen. Purley Refresh CPU
Front Panel
• System power on/off
• System reset
• 2 x USB 3.0 Type A
LEDs
• Power status
Drive Bays
External: 2.5″ hot swap x 10 (6G SATA)
Backplane
• 2 x 4-port 12Gb SAS backplane with 1 SFF-8643 connector
• 1 x 2-port 6Gb SAS/SATA backplane with 2 x 7-pin connectors
Expansion Slots  (PCIe 3.0)
• 2 x16 slots (1 FHHL, 1 LP)
• 2 x OCP Mezzanine support:
1 PCIe Gen3 x16 (V2.0)
1 PCIe Gen3 x8 (V1.2)
System BIOS
BIOS Type :
• AMI UEFI BIOS
BIOS Features :
• ACPI
• PXE
• WOL
• AC loss recovery
• IPMI KCS interface
• SMBIOS
• Serial console redirection
• BIOS Boot Specification
• BIOS Recovery Mode
On-board Devices
SATA:
Intel® Lewisburg PCH on-chip solution
• 12 x SATA 6.0 Gb/s (by 3 x Slimline) + 2 x SATA 6.0 Gb/s (by 2 x SATA 7 pin)
IPMI :
Aspeed AST2500 Advanced PCIe Graphics & Remote Management Processor
• Baseboard Management Controller
• Intelligent Platform Interface 2.0 (IPMI 2.0)
• iKVM, Media Redirection, IPMI over LAN, Serial over LAN
• SMASH Support
• HTML5
Network Controller :
• Intel ® PCH (C622) Integrated 10GbE LAN Controller support 2 x 10GbE SFP+
• Networking options provided via OCP Mezzanine extension
• Broadcom BCM54612 (GbE) for BMC dedicated management port
Graphics :
Aspeed AST2500 Advanced PCIe Graphics & Remote Management Process
• PCIe VGA/2D Controller
• 1920×1200@60Hz 32bpp
Rear I/O
LAN:
• 2 x 10GbE SFP+
• 1 x GbE RJ45 dedicated to BMC management
USB:
2 x USB 3.0 Type A
VGA:
1 x external DB-15 VGA port
Serial Port:
1 x internal serial header
Power Supply
• 550W 1+1 redundant power supply 80+ Platinum
AC INPUT : 100~127V, 50/60Hz, 10A
200~240V, 50/60Hz, 5A
• 800W 1+1 redundant power supply 80+ Platinum (BTO)
AC INPUT :100-127V, 50/60Hz, 10A
200-240V, 50/60Hz, 5A
System Cooling
•7 x 40x28mm hot swap fans (Optional 7 x 40x56mm hot swap fans, BTO)
System Management
• IPMI : Aspeed AST2500 Advanced PCIe Graphics & Remote Management Processor
• Baseboard Management Controller
• Intelligent Platform Interface 2.0 (IPMI 2.0)
• iKVM, Media Redirection, IPMI over LAN, Serial over LAN
• SMASH Support
Environmental Specifications
• Storage temperature : -10ºC(14ºF) ~ 60ºC(140ºF)
• Operating temperature : 0ºC(32ºF) ~ 35ºC(95ºF)
• Storage operating humidity : 5%~95% non-condensing
Gross Weight (w/PSU & Rail)
• kgs : 22
• lbs : 48.5
Packaging Dimensions (W x D x H)
• mm : 615 x 1135 x 273
• inches : 24.2 x 44.7 x 10.8
Mounting
Standard : 28″ tool-less slide rail

* All specifications are subject to change without notice.